Cabletron Systems LANVIEWsecure Specifikace stáhnout pdf (Strana 33)

Security Configuration

Enabling a Backup Network Port

Device View SEHI

2-14 Management Module Guide

Enabling a Backup Network Port

Once you have enabled the locking feature for a specified repeater channel,

you will not be able to change your network connection unless you have placed

an additional port in a trunk state. If the channel is locked, changing the

network connection to a station port causes the port to shut down. To place an

additional port in a trunk state before locking the repeater channel, follow

these steps:

1. Highlight the port icon representing the port you want to place in

a trunk state.

2. Select Port Configuration from the Icon Subviews menu.

3. Set the Set Topological State button to “Forced_Trunk.”

The Topological State button will now read “Trunk.”

NOTE

If you are going to enable redundancy, it is not necessary to place an

additional port in a trunk state. All ports associated with the redundant

circuit will automatically be in a trunk state.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 52 53

Žádné komentáře

Cabletron Systems LANVIEWsecure Specifikace Strana 33