Cabletron-systems SmartSTACK 100 Uživatelský manuál stáhnout pdf (Strana 49)

Conﬁguring Your ELS100-16TX

3-3

• Class B addresses are used for medium sized networks. The ﬁrst

two bytes identify the network and the last two identify the

node. The ﬁrst byte of a class B address must be in the range

128–191. The address 128.150.50.10 identiﬁes node 50.10 on

network 128.150.

• Class C addresses are used for small networks. The ﬁrst three

bytes identify the network and the last byte identiﬁes the node.

The ﬁrst byte of a class C address must be in the range 192–223.

The address 192.138.217.10 identiﬁes node 10 on network

192.138.217.

To assign an IP address to a port, at the LCM prompt:

1. Type

ipaddr <PORT-NUMBER> <IP ADDRESS>

For example, ipaddr 6 192.138.217.40 would set the IP address of

Port 6 to 192.138.217.40. LCM responds by displaying the IP address

table, as shown under the ipaddr command.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 109 110

Žádné komentáře

Cabletron-systems SmartSTACK 100 Uživatelský manuál Strana 49