Cabletron Systems CSX400-DC Uživatelská příručka Strana 82

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 275
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 81
Installation
68 CSX400 and CSX400-DC User’s Guide
Connecting the CSX400 to the Power Source
To connect the CSX400 to the power source, perform the following steps:
1. Plug the power cord into the back panel of the CSX400.
2. Plug the other end of the power cord into a grounded wall outlet.
3. Verify that the PWR LED is on, indicating that the CSX400 is receiving power. After the
CSX400 runs a self test, the CPU LED blinks green indicating normal operation. If the LED
remains red, the processor is faulty; contact Cabletron Systems Technical Support (refer to
Getting Help in Chapter 1.)
4. Proceed to Chapter 7 to configure the CSX400.
NOTE
The CSX400 has a universal power supply. This allows you to connect the CSX400 to
power sources of 100–125 and 200–240 Vac, 50/60 Hz.
Zobrazit stránku 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 274 275

Komentáře k této Příručce

Žádné komentáře