Cabletron Systems Access Server 316 Instalační příručka stáhnout pdf (Strana 157)

13-9

Modem Configuration Problems

Cannot Connect to Dial-Out Modem Offered as a LAT

Service

Solution

If you cannot connect to the dial-out modem offered as a LAT service, do the following:

Step Action

1 Verify that the physical port characteristics are configured correctly (Port and Device

Problems).

2 Verify that the port is configured correctly. Enter the following command. Substitute

the number of the dial-out modem port for 1:

Local> SHOW PORT 1

The SHOW PORT display will vary depending on the hardware you are using. For

information on configuring your access server for modem signals, refer to the

Network Access Software Management Guide.

3 Verify that you are using the correct cables to connect the modem to the access

server port. For information on supported cables, refer to your hardware

documentation.

4 Verify that the access server port hardware is working correctly. See the section

Verifying a Port for Hardware Failure (page 10-8).

5 For more information on LAT service connection problems, refer to Chapter 2.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 301 302

Žádné komentáře

Cabletron Systems Access Server 316 Instalační příručka Strana 157