Cabletron Systems MT8-MIM Specifikace stáhnout pdf (Strana 46)

Ethernet Media

4-22 Connector Types

Figure 4-12. BNC connectors

T-Connector

Connections from the cable to network nodes are typically made using

T-connectors, which provide taps for additional runs of coaxial cable to

workstations or network devices. T-connectors, as shown in Figure 4-13, below,

provide three BNC connections, two of which attach to Male BNC connectors on

the cable itself and one of which is used for connection to the Female BNC

connection of a transceiver or Desktop Network Interface Card (DNI or NIC) on a

workstation.

Figure 4-13. Thin Coax T-Connector

NOTE

T-connectors should be attached directly to the BNC

connectors of Network Interface Cards or other Ethernet

devices. The single solid strand connector of a T-connector

should not be attached to a coaxial jumper cable of any length.

Insulator

Solid Center Strand Hollow Center Channel

Locking Key

Key Guide Channel

Metal Casing

1845n12

1845n13

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 191 192

Žádné komentáře

Cabletron Systems MT8-MIM Specifikace Strana 46