Cabletron Systems SmartSwitch Router Specifikace stáhnout pdf (Strana 276)

100

101

Chapter 29: qos Commands

29 - 8 SSR Command Line Interface Reference Manual

qos set ip

Purpose

Set a priority for an IP flow.

Format

qos set ip

<name>

|any

|any

|any

|any

<tos>

|any

<interface-list>

|any

Mode

Configure

Description

The

qos

set

command sets the priority for an IP flow based on the following fields

in the flow:

•Flow name

• Source IP address and network mask

• Destination IP address and network mask

• Source port

• Destination port

•TOS

• Interface list

• Transport layer protocol (TCP or UDP)

You can set the priority of each field to control, low, medium, or high. The default is

low.

Parameters

<name>

Specifies the IP flow name.

Specifies the priority you are assigning

to the flow parameters you specified

from the list above. You can specify one

of the following priorities:

• control

– Assigns control priority to

the IP flow parameters you have spec-

ified. This is the highest priority.

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 361 362

Komentáře k této Příručce

Žádné komentáře

Cabletron Systems SmartSwitch Router Specifikace Strana 276

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cabletron Systems SmartSwitch Router