Cabletron Systems T2015 Specifikace stáhnout pdf (Strana 45)

5-10

System Outline

Samsung Electronics

Service Manual

5.2 Outline of Engine Firmware

The CLP 510/510N use 4 different colored toners (Yellow, Magenta, Cyan, Black) and it is a laser color

printer. Engine firmware controls the print processes, driving the print engine, paper feed, developer, fuser,

and paper discharge systems. It has both color and mono printing modes. The printer process sequence is

as follows:

System Initialization

When power to the system is turned on all system values are

initialized

Print Printer performs the actual printing job.

Post-Print

The finishing state of printing job. The printer puts all systems back

into a state ready to start the next job and then enters the Ready state.

Warm-Up Each part of system is activated and the system automatically

checks its status and all systems are prepared to accept a job for printing.

Pre-Print As soon as a printing order is inputted from host, the printer checks

the status of each part before performing the printing job.

Ready The normal state of the printer, waiting to receive a command from

a host to start a job. After a predefined length of time in the Ready

state if no print jobs are received the Power Save mode is entered.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 227 228

Žádné komentáře

Cabletron Systems T2015 Specifikace Strana 45