Cabletron Systems SSIM-R8-02 Specifikace stáhnout pdf (Strana 143)

Enterasys Xpedition User Reference Manual 123

VRRP Configuration Notes

The skew-time depends on the Backup router’s configured priority:

Skew-time = ((256 - Priority) / 256)

Therefore, the higher the priority, the faster a Backup router will detect that the Master

is down. For example:

– Default advertisement-interval = 1 second

– Default Backup router priority = 100

– Master-down-interval = time it takes a Backup to detect the Master is down

= (3 * adv-interval) + skew-time

= (3 * 1 second) + ((256 - 100) / 256)

= 3.6 seconds

• If a Master router is manually rebooted, or if its interface is manually brought down, it

will send a special keep-alive advertisement that lets the Backup routers know that a

new Master is needed immediately.

• A virtual router will respond to ARP requests with a virtual MAC address. This virtual

MAC depends on the virtual router ID:

virtual MAC address = 00005E:0001XX

where XX is the virtual router ID

This virtual MAC address is also used as the source MAC address of the keep-alive

Advertisements transmitted by the Master router.

• If multiple virtual routers are created on a single interface, the virtual routers must

have unique identifiers. If virtual routers are created on different interfaces, you can

reuse virtual router IDs.

For example, the following configuration is valid:

• As specified in RFC 2338, a Backup router that has transitioned to Master will not

respond to pings, accept telnet sessions, or field SNMP requests directed at the virtual

router's IP address.

Not responding allows network management to notice that the original Master router

(i.e., the IP address owner) is down.

ip-redundancy create vrrp 1 interface test-A

ip-redundancy create vrrp 1 interface test-B

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 393 394

Žádné komentáře

Cabletron Systems SSIM-R8-02 Specifikace Strana 143